Topcoat 2L/67oz 2.4kg/5.3lbs (2K) Medium White Gloss

Duroflon® DF21 is a medium white glossy solvent based anti-scratch weather resistant permanent carbon shield paint which is cross-linked with a carbon shield activator.

DF21 is an incredibly tough, 2-component surface paint which forms a durable matrix of molecular bonds (transformation into a carbon shield) resulting in permanent protection.

The coating can be applied directly and without primer to concrete, steel, wood, acrylic, plaster, painted or unpainted surfaces, indoors or outdoors.

Reachable area

  • 3 layers +/- 200gr/m2 - 165ml/m2 90 micron = 12m2 

  • 2 layers +/- 150gr/m2 - 125ml/m2 60 micron = 16m2 

  • 1 layer   +/-100gr/m2 -   83ml/m2 30 micron = 24m2

  • 3 layers  0.044lbs/ft2 - 0.56oz/ ft2 = 3 mil/120ft2 

  • 2 layers  0.030lbs/ft2 - 0.37oz/ ft2 = 2 mil/160ft2 

  • 1 layer   0.014lbs/ft2 - 0.19oz/ ft2 = 1 mil/240ft2

Advantages

  • Three simple steps: Clean, Dry, and Apply.

  • Easily repels water, dirt, dust, and pollutants.

  • This coating has an outstanding hydrophobic effect.

  • Restores damaged finishes and reduces cleaning intervals.

  • Resistant to all kinds of chemicals and UV radiation.

  • Anti Termite

  • Superior anti-pollution and anti-corrosion properties.

  • This coating can withstand temperatures of 300°C / 600° and is suitable for making walls fire retardant 

Technical Specifications

  • Thickness: 1 layer 1mil  / 30 micron (Air Spray)

  • Permanent Hydrophobic 

  • Zero Water Absorption / permeability

  • Hardness H8

  • Thermal Change -Thermal shock Compatible

  • UV- Atmospheric agents - Anti-Aging Proof

  • Temperature resistent 300°C / 600°F

  • Severe Chemical Attack resistant Liquids Group1 EN13529

  • Impact resistance 1kg from 62,5cm Height / 2.2 lbs from 25inch

  • Adhesion strength by pull-off: 2.4-2.6 N/mm2

Application information / How to use

Ambient temperature: 5-30°C / 41-86°F,  Avoid direct sunlight and/or high humidity.

IMPORTANT

Wear a full-face chemical respirator mask, safety suit and latex or nitrile gloves

The DF21 system can be applied directly or indirectly on all surfaces (porous and non-porous) such as concrete, steel, wood, acrylic, gypsum, painted or unpainted surfaces, indoors, or outdoors. The surface underneath will be superbly protected against erosion and corrosion and will stay cleaner longer. Cleaning becomes quicker, easier, and less expensive, as special cleaning agents are unnecessary. 

Corrosive Conditions or if problems can be expected with the substrate.

In case of corrosive conditions (Marine/Steel/Aluminium) or if can expect other problems with the substrate a zinc rich primer should be used prior to the application. A surface primer should pass the ASTM D3359 adhesion test.5. 

Application information

The DF21 paint can be applied directly or indirectly on all surfaces (porous and non-porous) such as concrete, steel, wood, acrylic, gypsum, painted or unpainted surfaces, indoors, or outdoors. The surface underneath will be superbly protected against erosion and corrosion and will stay cleaner longer. Cleaning becomes quicker, easier, and less expensive, as special cleaning agents are unnecessary.

Preparation

Make sure the surface is free from any contamination and dirt. (A zinc rich primer can be used in case of problems with the substrate).

Warning the surface must be completely dry before application and must stay dry for 6 hours after application after application!

A 2-Component Ceramic paint System

Mix one bottle of DF21B with one bottle of DF21A

by pouring bottle B into bottle A, or measure exactly by net weight in a ratio of 9:1 and mix thoroughly with a power agitator. Carefully pour the mixed contents into a professional paint sprayer, and spray in thin layers until the surface reaches a thickness of 3 mil / 90 micron  after drying. Depending on the surface, material and structure, different application techniques can be used (such as paint rollers or brushes). Let the surface dry for 24 hours. It is touch-dry in 1 hours, after 4 hours, 85% cured, and the remaining 15% (transformation into a carbon shield) is fully cured after 7 days. Be aware that the mixed contents cannot be stored longer than 3 hours. The surface can simply be maintained with a high pressure washer at 80 bar using our biologically degradable Shampoo Cleaner.

Tool cleaning

The individual components, as well as the mixing system of the paint sprayer, can be diluted and cleaned using our Sterile Cleaner.

Storage and handling

Store in dark and dry conditions at room temperature.

Use gloves and a full fresh air face mask.

Scan the QR-Code on the product for our Technical Data Sheet/Material Safety Data Sheet (TDS/MSDS).

Packaging Information

Includes plastic sealed wrap

1 pcs Single 2.6kg / 5.6 lbs measurement L17cm x W13cm x H12cm / L7inch x W5inch x H5inch

8 pcs in a carton W52cm x H15cm x D44cm / W20.5inch x H5.9inch x D17.3inch  20.4kg / 45 lbs

DF21-2000-9010