Topcoat 2L/67oz 2.0kg/4.4lbs (2K) Clear Gloss Textured

DF31 is an incredibly tough, 2-component surface coating infused with micronized nanoparticles. It forms a durable matrix of molecular bonds (transforming into a carbon shield), resulting in permanent protection and a smooth, non-slip surface.

The coating can be applied directly and without a primer to concrete, steel, wood, acrylic, plaster, painted, or unpainted surfaces, indoors or outdoors.

Reachable area:

• 3 layers +/- 222gr/m2 - 222ml/m2 90 microns = 9m2

• 2 layers +/- 111gr/m2 - 111ml/m2 60 microns = 18m2

• 1 layer +/-    74gr/m2 - 74ml/m2 30 microns = 27m2

• 3 layers 0.050lbs/ft2 - 0.76oz/ft2 = 3 mil/90ft2

• 2 layers 0.033lbs/ft2 - 0.51oz/ft2 = 2 mil/180ft2

• 1 layer 0.017lbs/ft2 - 0.25oz/ft2 = 1 mil/270ft2

Advantages:

• Three simple steps: Clean, Dry, and Apply.

• Easily repels water, dirt, dust, and pollutants.

• This coating has an outstanding hydrophobic effect.

• Restores damaged finishes and reduces cleaning intervals.

• Resistant to all kinds of chemicals and UV radiation.

• Anti-Termite

• Superior anti-pollution and anti-corrosion properties.

• This coating can withstand temperatures of 300°C / 600°C.

• Suitable for making walls fire retardant and is the best solution for waterproofing rooftops.

Technical Specifications:

• Thickness: 1 layer 1mil / 30 microns (Air Spray)

• Hydrophobic

• Zero Absorption permeability

• Hardness H9

• Thermal Change - Thermal shock Compatible

• UV - Atmospheric agents - Anti-Aging Proof

• Temperature resistant 300°C / 600°F

• Severe Chemical Attack resistant Liquids Group1 EN13529

• Impact resistance 1kg from 62.5cm Height / 2.2lbs from 25inch

• Adhesion strength by pull-off: 2.4-2.6 N/mm2

Application Information / How to use:

Ambient temperature: 5-30°C / 41-86°F. Avoid direct sunlight and/or high humidity.

IMPORTANT:

Wear a full-face chemical respirator mask, safety suit, and latex or nitrile gloves.

The DF31 coating can be applied directly or indirectly on all surfaces (porous and non-porous) such as concrete, steel, wood, acrylic, gypsum, painted, or unpainted surfaces, indoors, or outdoors. The surface underneath will be superbly protected against erosion and corrosion and will stay cleaner longer. Cleaning becomes quicker, easier, and less expensive, as special cleaning agents are unnecessary.

Corrosive Conditions or if problems can be expected with the substrate:

In case of corrosive conditions (Marine/Steel/Aluminium) or if other problems are expected with the substrate, a zinc-rich primer should be used prior to application. A surface primer should pass the ASTM D3359 adhesion test.5.

Preparation:

Ensure the surface is free from any contamination and dirt. A zinc-rich primer can be used in case of problems with the substrate. Warning: the surface must be completely dry before application and must stay dry for 6 hours after application!

This is a 2-Component Coating System:

Mix one bottle of DF31B with one bottle of DF31A by pouring bottle B into bottle A or measuring exactly by net weight in a ratio of 9:1 and mix very well. Carefully pour the mixed contents into a professional paint sprayer and spray in thin layers until the surface reaches a thickness of 3 mil / 90 microns after drying. Depending on the surface, material, and structure, different application techniques can be used, such as a paint sprayer or brush.

Let the surface dry for 24 hours. It is touch-dry in 1 hour; after 4 hours, it's 85% cured, and the remaining 15% (transforming into carbon shield) is fully cured after 7 days. Note that the mixed contents cannot be stored longer than 3 hours. The surface can be easily maintained with a high-pressure washer at 80 bar using our biologically degradable Shampoo Cleaner.

Tool cleaning:

The individual components, as well as the mixing system of the paint sprayer, can be diluted and cleaned using our Steril Cleaner.

Storage and handling:

Store in dark and dry conditions at room temperature.

Use gloves and a full fresh air face mask.

Scan the QR-Code on the product for our Technical Data Sheet/Material Safety Data Sheet (TDS/MSDS).

Packaging Information:

Includes plastic sealed wrap

1 pc single 2.15kg/4.4lbs measurement L17cm x W13cm x H12cm / L7inch x W5inch x H5inch

8 pcs in a carton W52cm x H15cm x D44cm / W20.5inch x H5.9inch x D17.3inch 17.2kg/24lbs