Topcoat 2L/67oz 1.9kg/4.2lbs (2K) Clear Matte

Duraflon® DF12 is a transparent, solvent-based, anti-scratch, weather-resistant permanent carbon shield matte coating. It's cross-linked with a carbon shield activator, ensuring excellent durability and chemical resistance. Moreover, it can be applied to any organic substrate without the need for a primer.

DF12 is an extremely strong 2-component surface coating that forms a durable molecular bond matrix (transforms into a carbon shield)) for permanent protection.

The coating can be applied directly to concrete, steel, wood, acrylic, plaster, painted or unpainted surfaces, indoors or outdoors.

Reachable area 

  • 3 layers +/- 270gr/m2 - 285ml/m2 75 micron =   7m2

  • 2 layers +/- 180gr/m2 - 190ml/m2 50 mikron = 14m2

  • 1 layer   +/-   90gr/m2 -   95ml/m2 25 mikron = 21m2

  • 3 layers 0.06lbs/ft2 - 0.96oz/ ft2 = 3 mil/ 70ft2 

  • 2 layers 0.04lbs/ft2 - 0.64oz/ ft2 = 2 mil/140ft2 

  • 1 layer   0.02lbs/ft2 - 0.32oz/ ft2 = 1 mil/210ft2

Advantages

  • Three simple steps: Clean, Dry, and Apply.

  • Easily repels water, dirt, dust, and pollutants.

  • This coating has an outstanding hydrophobic effect.

  • Restores damaged finishes and reduces cleaning intervals.

  • Resistant to all kinds of chemicals and UV radiation.

  • Anti Termite
  • Superior anti-pollution and anti-corrosion properties.

  • This coating can withstand temperatures of 300°C / 600°C

  • Suitable for making walls fire retardant and is most best solution to make rooftops waterproof

Technical Specifications

  • Thickness: 1 layer 1 mil / 25 micron

  • Hydrophobic 

  • Zero Absorption permeability

  • Hardness H9 

  • Thermal Change -Thermal shock Compatible

  • UV- Atmospheric agents - Anti-Aging Proof

  • Temperature resistent 300°C / 600°F

  • Severe Chemical Attack resistant Liquids Group1 EN13529

  • Impact resistance 1kg from 62,5cm Height / 2.2lbs from 25inch

  • Adhesion strength by pull-off: 2.4-2.6 N/mm2

Application information / How to use

Ambient temperature: 5-30°C / 41-86°F Avoid direct sunlight and/or high humidity.

IMPORTANT

Wear a full-face chemical respirator mask, safety suit and latex or nitrile gloves

Application information

The DF12 coating can be applied directly or indirectly on all surfaces (porous and non-porous) such as concrete, steel, wood, acrylic, gypsum, painted or unpainted surfaces, indoors, or outdoors. The surface underneath will be superbly protected against erosion and corrosion and will stay cleaner longer. Cleaning becomes quicker, easier, and less expensive, as special cleaning agents are unnecessary.

Corrosive Conditions or if problems can be expected with the substrate.

In case of corrosive conditions (Marine/Steel/Aluminium) or if can expect other problems with the substrate our zinc rich primer should be used prior to the application. Any other surface primer should pass the ASTM D3359 adhesion test.5. 

Preparation

Make sure the surface is free from any contamination and dirt.The surface must be completely dry before application and must stay dry for 6 hours after application after application!

This is a 2-Component System

Mix one bottle of DF12B with one bottle of DF12A

by pouring bottle B into bottle A, or measure exactly by net weight in a ratio of 9:1 and mix very well. Carefully pour the mixed contents into a professional paint sprayer, and spray in thin layers until the surface reaches a thickness of 3 mil / 75 micron after drying. Depending on the surface, material and structure, different application techniques can be used, such as a paint sprayer or brush.

Let the surface dry for 24 hours. It is touch-dry in 1 hours, after 4 hours, 85% cured, and the remaining 15% (transformation into a carbon shield) is fully cured after 7 days. Be aware that the mixed contents cannot be stored longer than 3 hours. The surface can simply be maintained with a high pressure washer at 80 bar using our biologically degradable Shampoo Cleaner.

Tool cleaning

The individual components, as well as the mixing system of the paint sprayer, can be diluted and cleaned using our Sterile Cleaner.

Storage and handling

Store in dark and dry conditions at room temperature.
Use gloves and a full fresh air face mask.
Scan the QR-Code on the product for our Technical Data Sheet/Material Safety Data Sheet (TDS/MSDS).

Packaging Information

Includes plastic sealed wrap

1 pcs single 1.9gr/4.3lbs measurement L17cm x W13cm x H12cm / L7inch x W5inch x H5inch

8 pcs in a carton W52cm x H15cm x D44cm / W20.5inch x H5.9inch x D17.3inch  16.4kg/36.2lbs

DF12-2000-0000