

This coating can be applied on natural wood and stone and is 100% invisible. The surface will be cleaner for longer, and the cleaning itself becomes less time and less expensive as special cleaning agents are unnecessary.
Advantages and Technical information
Applicable in two simple steps Clean-and Apply
Algae and Bacteria get less chance to survive, and hygiene goes to a higher level.
This coating has an outstanding hydrophobic effect, wood and stone, mineral stone walls stays cleaner and dryer for longer.
One application will last up to 5 years
How to use
Make clean the surfaces thoroughly until the complete surface is absolutely clean. If necessary use our Reactivating Pure Shine Shampoo in
combination with a high pressure washer. Make sure that all contamination is removed so that the sealant can bond properly onto a clean surface.
Make sure that the surface is completely dry before application this is crucial as the stone or wooden surface needs to absorb the coating !
The surface needs to be evenly saturated – even coverage is crucial for the system to work properly.
Spray till the surface is saturated and let the surface dry. Dust-dry after approximately 2 hours at 23°C / 50% rel. air humidity, touch-dry after
approximately 6 hours. 85% dry after 24 hour, and is fully cured after 48 hour.
Consumption
+/- 40 ml/m2 / 0.14oz/ft2 Reachable Area ca 12m2
Storage and handling
Store in dark and dry conditions at room temperature.
Ask for our MSDS via 24h - Emergency Phone: +62 811 640 5000 (advisory service in German, English, or Bahasa language)
Packaging Information
Includes plastic sealed wrap
1 pcs Weight 550 gram / 1.20 lbs single size L7cm x W7cm x H21cm / L2.8inch x W2.8inch x H8.3inch
30 pcs in carton W55cm x H26cm x D45cm / W22inch x H10inch x D18inch